The Rosin Roller™ varies from the traditional rosin press design as it applies pressure between dual heated plates. This causes a limitation for commercial scale production as when plates sizes increase to accommodate more material, the larger surface significantly reduces pressure. Additionally, large plate sizes cause the oil to degrade as during pressing it sits on heated plates, unable to escape.
As such we concluded early on that the key to large scale production is to create a continuous feed of small batch presses. As we developed and tested this technology, we have found not only an increase in speed of production, but a significant increase in yield per press. By pushing the oil out in one direction we are able to capture a higher percentage of essential oils.
Rosin Roller™ is built with 5 inch stainless steel rollers. Fully adjustable pressure range operating between 750LB to 2,500LB PER SQUARE INCH. Since the contact point of the rollers is a thin line, not a large plate surface we are able to achieve much higher pressure with less applied force.
Pelican case INCLUDED!
Rosin Roller™ Specs:
- 5 inch stainless steel rollers
- Adjustable pressure ranging from 750LB to 2,500LB PER SQUARE INCH
- PID Controller
- Manual speed control
- Electrical: 110V
- Measurements: 16 inches by 6 inches by 7 inches
- Weight: 74 Lbs
- Shipping Dimensions: 22 inches by 16 inches by 11 inches
Rosin Roller™ comes with a lifetime warranty. We will supply parts free of charge. If the damage is beyond repair, we will cover the cost of shipping and send out a new machine.